VersaPOD (VP2) SidePOD and Baffle

VersaPOD (VP2) SidePOD and Baffle Enlarge this image

Overview

Siemon's SidePOD and Baffle solution is designed to support side-to-side ventilated active equipment such as the Cisco Nexus® 7018 Series Switches.

The SidePOD is an option for use with Siemon's VP2A 1200mm (48 in.) deep VersaPOD cabinets and creates the necessary clearance for proper airflow to the switch. The baffles are used to properly route cold air from the front of the cabinet to the input side of the switch as well as route exhaust from the output side of the switch to be vented in the hot aisle. Cisco Nexus® 7018 Operational Compliance has been validated via Computational Fluid Dynamics (CFD) modeling under maximum operating conditions.

In addition to providing a cooling platform, the SidePOD also allows full size Zero-U panels to be used in End of Row applications. This includes up to 12U of vertical patching and high capacity vertical cable management with hinged covers.

  • End of Row Capacity Increase ­ Increases with SidePOD so full size Zero-U patch panels and cable managers can be used.
  • Reversible Baffle Design ­ Baffles can be installed in either orientation to properly route either cold air input or hot air exhaust. Two angled baffles may be nested 180º to each other in the same Zero-U space allowing two side-vented switches to be mounted next to each other
  • Shared Use of VP2 Side Panels ­ The SidePOD is compatible with VP2 side panels allowing VersaPOD panels to be transitioned to the SidePOD when added to end of row installations
  • Zero-U Modularity ­ Ensures that with a baffle installed, the balance of Zero-U space can be fully utilized for patching or cable management.
  • Cable Access Openings ­ Multiple openings in the lid accept optional brush guards to provide cable access to the Zero-U space from overhead distribution systems.

Benefits

Enlarge this image
Split Baffle Design - Allows the baffles to be nested in the Zero-U space enabling placement of side venting equipment in adjacent cabinets
Enlarge this image
Zero-U Modularity - Ensures that with even a baffle installed, the balance of Zero-U space can be fully utilized for patching or cable management
Enlarge this image
Operational Compliance - Has been validated via Computational Fluid Dynamics (CFD) modeling under maximum operating conditions


Part Numbers

SidePOD
VP2B-SPAA1-(XX) (Picture) SidePOD with 2 Vented Doors, Black

Use (XX) to specify height. 42 = 42U, 45 = 45U

Includes (2) leveling feet, (2) sets of baying brackets, (1) bonding conductor and assembly hardware (ships unassembled)

VP2B-SPAC1-(XX) (Picture) SidePOD with 1 Vented Door and 1 Solid Door, Black

Use (XX) to specify height. 42 = 42U, 45 = 45U

Includes (2) leveling feet, (2) sets of baying brackets, (1) bonding conductor and assembly hardware (ships unassembled)

Zero-U Baffle
VP2A-BFL-S (Picture) Zero-U Baffle, Black

Includes mounting hardware

VP2A-BFP-1-42 (Picture) Zero-U Baffle Filler Panel, Black

Blank panel used to fill gap between baffle and adjacent triplex Zero-U space on 42U cabinets

Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice

Edge Data Centers