SFP+ 10G Cisco Compatible Direct Attach Copper Passive and Active Cables

Overview

Cisco Compatible SFP+ cables from Siemon were developed specifically as a cost-effective and lower-power alternative to optical modules for short reach links in high-speed interconnect applications such as high-performance computing (HPC), top-of-rack switching and network storage. The assemblies support data transfer rates up to 10G, meeting or exceeding current network standards.

Cisco Compatible SFP+ active and passive copper cable assemblies are programmed specifically to work with Cisco network equipment. When used with Cisco equipment they will not trigger the warning message that a non-Cisco transceiver has been detected. These cables do not violate Cisco's warranty.

These SFP+ fully-shielded assemblies combine twin-axial shielded cable configuration with robust die cast housings for enhanced support of high frequency data rates. These SFP+ assemblies are impedance matched to ensure interoperability and minimize EMI leakage through their fully-shielded design.

The active cables use low power consumption equalizers within the connector to extend the length that copper cables can reach beyond the limits of passive copper solutions while minimizing the cable's gauge.

  • Enhanced EMI shielding for low emissions
  • Multiple conductor sizes available
  • Strain relief
  • Standard SFP+ latch interoperable with all compliant interfaces
  • Ultra low crosstalk for enhanced performance
  • Laser stripped conductors
  • Overmold provides additional strain relief to minimize pistoning
  • Welding results in less dielectric shrink-back than soldering
  • Automated welding for unmatched consistency
  • Color-coded Cable Clips (optional)
  • "Cisco" is a registered trademark of Cisco and/or its affiliates.

Part Numbers

Part Numbers

SFPH10GB0.3MS(XX)  SFP+ Passive Copper Cable Assemblies, length = 0.3m (1 ft.), Gauge = 30, various colors

Use (XX) to specify color: 02 = white, 03 = red, 06 = blue

SFPH10GB0.5MS(XX)  SFP+ Passive Copper Cable Assemblies, 0.5m (1.6 ft.), Gauge = 30, various colors

Use (XX) to specify color: 02 = white, 03 = red, 06 = blue

SFPH10GB1.5MS(XX)  SFP+ Passive Copper Cable Assemblies, 1.5m (4.9 ft.), Gauge = 30, various colors

Use (XX) to specify color: 02 = white, 03 = red, 06 = blue

SFPH10GB1MS(XX)  SFP+ Passive Copper Cable Assemblies, 1m (3.3 ft.), Gauge = 30, various colors

Use (XX) to specify color: 02 = white, 03 = red, 06 = blue

SFPH10GB2.5MS(XX)  SFP+ Passive Copper Cable Assemblies, 2.5m (8.2 ft.), Gauge = 30, various colors

Use (XX) to specify color: 02 = white, 03 = red, 06 = blue

SFPH10GB2MS(XX)  SFP+ Passive Copper Cable Assemblies, 2m (6.6 ft.), Gauge = 30, various colors

Use (XX) to specify color: 02 = white, 03 = red, 06 = blue

SFPH10GBACU10MS  SFP+ Active Copper Cable Assemblies, 10m (32.8 ft.), Gauge = 28, Color = Black
SFPH10GBACU7MS  SFP+ Active Copper Cable Assemblies, 7m (23.0 ft.), Gauge = 28, Color = Black
SFPH10GBCU0.3MS  SFP+ Passive Copper Cable Assemblies, length = 0.3m (1 ft.), Gauge = 30, Color = Black
SFPH10GBCU0.5MS  SFP+ Passive Copper Cable Assemblies, 0.5m (1.6 ft.), Gauge = 30, Color = Black
SFPH10GBCU1.5MS  SFP+ Passive Copper Cable Assemblies, 1.5m (4.9 ft.), Gauge = 30, Color = Black
SFPH10GBCU1MS  SFP+ Passive Copper Cable Assemblies, 1m (3.3 ft.), Gauge = 30, Color = Black
SFPH10GBCU2.5MS  SFP+ Passive Copper Cable Assemblies, 2.5m (8.2 ft.), Gauge = 30, Color = Black
SFPH10GBCU2MS  SFP+ Passive Copper Cable Assemblies, 2m (6.6 ft.), Gauge = 30, Color = Black
SFPH10GBCU3.5MS  SFP+ Passive Copper Cable Assemblies, 3.5m (11.5 ft.), Gauge = 30, Color = Black
SFPH10GBCU3MS  SFP+ Passive Copper Cable Assemblies, 3m (9.8 ft.), Gauge = 30, Color = Black
SFPH10GBCU4MS  SFP+ Passive Copper Cable Assemblies, 4m (13.1 ft.), Gauge = 26, Color = Black
SFPH10GBCU5MS  SFP+ Passive Copper Cable Assemblies, 5m (16.4 ft.), Gauge = 24, Color = Black
CLIP-CBL-50-(XX)  Color-coded cable clip, 30 and 28 AWG, bag of 25 clips

Use (XX) to specify color: 02=white, 03=red, 04=gray, 05=yellow, 06=blue, 07=green, 08 = violet, 09 = orange

CLIP-CBL-62-(XX)  Color-coded cable clip, 26 and 24 AWG, bag of 25 clips

Use (XX) to specify color: 02=white, 03=red, 04=gray, 05=yellow, 06=blue, 07=green, 08 = violet, 09 = orange

Note:

Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice

Wifi White Paper